HVI power Conductor

Details

High-voltage-resistant, insulated down conductor for maintaining the separation distance from electrically conductive parts according to IEC 62305-3.

For use up to an equivalent separation distance s ≤ 90 cm (in air) or s ≤ 180 cm (solid building material).

The following maximum cable lengths therefore apply for the down conductor, depending on the class of lightning protection system (LPS):
LPS I max. 11.25 m
LPS II max. 15.0 m
LPS III/IV max. 22.50 m

The HVI power long Conductor meets the requirements of DIN IEC/TS 62561-8 (VDE V 0185-561-8).
Processing temperature -5 to +40 °C and permanent temperature range (in case of fixed installation) of -30 to +70 °C to be observed.

Models

HVI power Conductor (pre-assembled, installation inside the tube)

HVI power Conductor (pre-assembled, installation outside the tube) for HVI power supporting tube GRP / Al

HVI power long Conductor (on a reel)

HVI power long Conductor (cut to length)

HVI power Conductor (pre-assembled, installation inside the tube)

With one head piece and one connection element (enclosed loose). Minimum order length 6 m, conductor length has to be stated when ordering (in steps of 0.5 m).

Specifications

Type
Part No.
Material of conductor
Material of insulation
Material of sheath
Colour of conductor
RAL colour
Cross section of core
Lightning current carrying capability (class / Iimp)
Equivalent separation distance s (in air)
Diameter Ø conductor
Characteristics of sheath
Minimum order length
Maximum order length
Standard
Weight
GTIN
PU
Part No.
  • HVI P RIV 90 27 L6M SW
  • 819 160
  • Cu
  • PE
  • PE
  • black ●
  • similar to 9011
  • 25 mm²
  • H2 / 200 kA
  • ≤ 90 cm
  • 27 mm
  • UV stabilised and weather resistant
  • 6 m
  • 35 m
  • DIN IEC/TS 62561-8 (VDE V 0185-561-8)
  • 4,8 kg
  • 4013364152298
  • 1 pc(s)
  • 819 160
  • Specifications (PDF)
  • More

HVI power Conductor (pre-assembled, installation outside the tube) for HVI power supporting tube GRP / Al

HVI power Conductor pre-assembled for installation outside the tube with one head piece and one connection element (enclosed loose).
Connection kit for installing the HVI power Conductor on HVI power supporting tubes GRP / Al consists of threaded pins, a connection part, heat-shrinkable sleeve and fixing ring with slotted conductor holder (Ø27 mm) for the sealing end (including cable ties).
Minimum order length 6 m, conductor length has to be stated when ordering (in steps of 0.5 m).

Specifications

Type
Part No.
Material of conductor
Material of insulation
Material of sheath
Colour of conductor
RAL colour
Cross section of core
Lightning current carrying capability (class / Iimp)
Equivalent separation distance s (in air)
Diameter Ø conductor
Characteristics of sheath
Minimum order length
Maximum order length
Standard
Weight
GTIN
PU
Part No.
  • HVI P RAV 90 27 L6M SW
  • 819 165
  • Cu
  • PE
  • PE
  • black ●
  • similar to 9011
  • 25 mm²
  • H2 / 200 kA
  • ≤ 90 cm
  • 27 mm
  • UV stabilised and weather resistant
  • 6 m
  • 35 m
  • DIN IEC/TS 62561-8 (VDE V 0185-561-8)
  • 4,48 kg
  • 4013364272224
  • 1 pc(s)
  • 819 165
  • Specifications (PDF)
  • More
    • Further Pictures
      open PDF
      Further Information
      Product Specifications (Text)

      Back

      HVI power Conductor (pre-assembled for installation outside the supporting tube)
HVI power Conductor
High-voltage-resistant down conductor for keeping the separation distance from conductive parts according to IEC 62305-3 
Equivalent separation distance s =< 90 cm (in air)
or s =<  180 cm (for solid material).
HVI power Conductor with pre-assembled head piece and loose connection element.
Weather-proof and UV-stabilised 
      Material of conductor: Cu 
      Material of insulation: PE 
      Material of sheath: PE 
      Diameter Ø conductor: 27 mm
      Standard: DIN IEC/TS 62561-8 (VDE V 0185-561-8) 

      delivery and installation.

      Brand: DEHN
      Type: HVI P RAV 90 27 L6M SW
      Part No.: 819 165

      or equivalent.
      Installation Instructions
      Certificates
      10043016_003_00
      Declaration of Manufacturer_HVI Power Conductor Ex

HVI power long Conductor (on a reel)

The HVI power long Conductor for on-site assembly comes in a length of 100 m on a disposable plywood reel (diameter approx. 900 mm, width approx. 485 mm). Allen key included in delivery.

Specifications

Type
Part No.
Material of conductor
Material of insulation
Material of sheath
Colour of conductor
RAL colour
Cross section of core
Lightning current carrying capability (class / Iimp)
Equivalent separation distance s (in air)
Diameter Ø conductor
Characteristics of sheath
Standard
Weight
GTIN
PU
Part No.
  • HVI P LO 90 27 L100M SW
  • 819 137
  • Cu
  • PE
  • PE
  • black ●
  • similar to 9011
  • 25 mm²
  • H2 / 200 kA
  • ≤ 90 cm
  • 27 mm
  • UV stabilised and weather resistant
  • DIN IEC/TS 62561-8 (VDE V 0185-561-8)
  • 854 g/m
  • 4013364152625
  • 100 m
  • 819 137
  • Specifications (PDF)
  • More
    • Further Pictures
      Further Information
      Product Specifications (Text)

      Back

      HVI power long Conductor (on a reel)
HVI power Conductor
High-voltage-resistant insulated down
conductor for keeping the separation distance from
conductive parts according to EN 62305-3
Equivalent separation distance  s =< 90 cm (in air)
or s =< 180 cm (solid building material).
Weather-resistant and UV stabilised
      Material of conductor: Cu 
      Material of insulation: PE 
      Material of sheath: PE 
      Diameter Ø conductor: 27 mm
      Standard: DIN IEC/TS 62561-8 (VDE V 0185-561-8) 

      delivery and installation.

      Brand: DEHN
      Type: HVI P LO 90 27 L100M SW
      Part No.: 819 137

      or equivalent.
      Installation Instructions
      Certificates
      Declaration of Manufacturer_HVI Power Conductor Ex
      10043009_003_00

HVI power long Conductor (cut to length)

Cut-to-length HVI power long Conductor for on-site assembly. The conductor is delivered as a coil (Part No. 819 163) or on a reel (Part No. 819 161).
Conductor length to be indicated when ordering (in steps of 0.5 m).

Specifications

Type
Part No.
Material of conductor
Material of insulation
Material of sheath
Colour of conductor
RAL colour
Cross section of core
Lightning current carrying capability (class / Iimp)
Equivalent separation distance s (in air)
Diameter Ø conductor
Characteristics of sheath
Minimum order length
Maximum order length
Standard
Weight
GTIN
PU
Part No.
  • HVI P LO 90 27 L6...35M SW
  • 819 163
  • Cu
  • PE
  • PE
  • black ●
  • similar to 9011
  • 25 mm²
  • H2 / 200 kA
  • ≤ 90 cm
  • 27 mm
  • UV stabilised and weather resistant
  • 6 m
  • 35 m
  • DIN IEC/TS 62561-8 (VDE V 0185-561-8)
  • 4,36 kg
  • 4013364280199
  • 1 pc(s)
  • 819 163
  • Specifications (PDF)
  • More
    • Further Pictures
      Further Information
      Product Specifications (Text)

      Back

      HVI power long Conductor (cut to length), black
HVI power Conductor
High-voltage-resistant, insulated down conductor for keeping the separation distance from conductive parts according to IEC/EN 62305-3  
Equivalent separation distance s =< 90 cm (in air)
or s =< 180 cm (solid building material)
Weather-resistant and UV-stabilised
Conductor cut to length 6.0 - 35.0 m
      Material of conductor: Cu 
      Material of insulation: PE 
      Material of sheath: PE 
      Diameter Ø conductor: 27 mm
      Standard: DIN IEC/TS 62561-8 (VDE V 0185-561-8) 

      delivery and installation.

      Brand: DEHN
      Type: HVI P LO 90 27 L6...35M SW
      Part No.: 819 163

      or equivalent.
      Installation Instructions
      Certificates
      10043015_003_00
      Declaration of Manufacturer_HVI Power Conductor Ex
  • HVI P LO 90 27 L36...80M SW
  • 819 161
  • Cu
  • PE
  • PE
  • black ●
  • similar to 9011
  • 25 mm²
  • H2 / 200 kA
  • ≤ 90 cm
  • 27 mm
  • UV stabilised and weather resistant
  • 36 m
  • 80 m
  • DIN IEC/TS 62561-8 (VDE V 0185-561-8)
  • 25,97 kg
  • 4013364281646
  • 1 pc(s)
  • 819 161
  • Specifications (PDF)
  • More
    • Further Pictures
      Further Information
      Product Specifications (Text)

      Back

      HVI power long Conductor (cut to length), black
HVI power Conductor
High-voltage-resistant, insulated down conductor for keeping the separation distance from conductive parts according to IEC/EN 62305-3  
Equivalent separation distance s =< 90 cm (in air)
or s =< 180 cm (solid building material)
Weather-resistant and UV-stabilised
Conductor cut to length 36.0 - 80.0 m
      Material of conductor: Cu 
      Material of insulation: PE 
      Material of sheath: PE 
      Diameter Ø conductor: 27 mm
      Standard: DIN IEC/TS 62561-8 (VDE V 0185-561-8) 

      delivery and installation.

      Brand: DEHN
      Type: HVI P LO 90 27 L36...80M SW
      Part No.: 819 161

      or equivalent.
      Installation Instructions
      Certificates
      Declaration of Manufacturer_HVI Power Conductor Ex
      10043014_003_00