Accessories for Condition Monitoring System with LifeCheck Sensor

Details

Models

DIN Rail mounted Power Supply Unit

USB Interface Converter of type USB-NANO-485

DIN Rail mounted Power Supply Unit

Basic circuit diagram PSU DC24 30WDimension drawing PSU DC24 30W

High-performance DIN rail mounted power supply unit with single-phase wide-range input can be connected to different supply systems. The operating state indicator on the front panel indicates that the output voltage is present. Up to 10 DRC MCM XT or DRC SCM XT (single application) or up to 15 DRC MCM XT (multiple application) monitoring devices can be connected to a single power supply unit.


Specifications

Type
Part No.
Nominal input voltage (Ue)
Input voltage range
Input voltage derating
Frequency
Input current (Ie)
Discharge current
Switch-on current
Mains buffering
Nominal output voltage (Ua)
Output voltage range
Output current (Ia)
Presetting
Residual ripple
Current limitation
Behaviour in case of overload
Operating state indication
Efficiency
Power loss (PV)
Max. power loss (PV)
Integrated fuse
Recommended backup fuse
Ambient temperature
Degree of pollution
Climatic category
Enclosure
Protection class
Degree of protection
Short-circuit-proof
Open-circuit-proof
Can be connected in parallel
Can be connected in series
Cross-sectional area (input / output)
Type of attachment
Dimensions (W x H x D)
Weight
Standards / regulations
Weight
GTIN
PU
Part No.
  • PSU DC24 30W
  • 910 499
  • 100-240 V a.c.
  • 85-264 V a.c.; 120-373 V d.c.
  • < 100 V a.c.: Ia max. 1 A
  • 44-66 Hz; 0 Hz
  • 0.7 A at 110 V a.c. / 0.5 A at 230 V a.c.
  • typ. 1 mA
  • < 30 A, NTC
  • > 10 ms at 110 V a.c. / > 80 ms at 230 V a.c.
  • 24 V d.c. (SELV)
  • 22.8-26.4 V d.c., variable
  • 1.3 A at 24 V d.c., max. 0.9 A in any installation position
  • 24 V d.c.
  • < 100 mVpp at 20 MHz
  • typ. 1.1 x Ia
  • constant current
  • green LED
  • typ. 82 %
  • 2.6 W (230 V a.c. / open circuit), 7.0 W (230 V a.c. / nominal load)
  • typ. 7.3 W (100 V a.c. / 24 V, 1.3 A d.c.)
  • 2 AT
  • circuit breaker 10 A, 16 A, characteristic B, C
  • -25 °C ... +55 °C
  • 2 (according to EN 50178)
  • 3K3 (according to EN 60721)
  • plastic, light grey
  • prepared for protection class II
  • IP20 according to EN 60529
  • yes
  • yes
  • yes
  • yes
  • 0.08-2.5 mm² / AWG 28 ... 12
  • DIN rail mounting (EN 60715)
  • 54 x 89 x 59 mm
  • 180 g
  • EN 60950, EN 61204-3, UL 60950, UL 508, GL
  • 180 g
  • 4013364157149
  • 1 pc(s)
  • 910 499
  • Specifications (PDF)
  • More

USB Interface Converter of type USB-NANO-485

USB-Nano-485 converts signals between USB and RS485 and is specifically designed for two-wire RS485 buses. LEDs indicate the operating state (yellow), Rx (green) and Tx (red). Due to its compact dimensions, USB-Nano-485 is ideally suited for use with notebooks, however, stationary use is also possible.


Specifications

Type
Part No.
Speed
Cable length
Power consumption
Operating systems
Dimensions (without plug) (H x W x L)
Weight
GTIN
PU