BLITZDUCTOR – Base Parts

BXT BAS – Without signal disconnection / BSP BAS 4 – With signal disconnection

  • Universal base parts for protection modules of the BLITZDUCTOR XT/XTU/SP series
  • Two base parts with or without signal disconnection if the protection module is removed
  • Connection of up to four lines

Models

BXT BAS

BSP BAS 4

BXT BAS

Basic circuit diagram with and without plugged-in moduleDimension drawing BXT BAS

The BLITZDUCTOR XT base part is an extremely space-saving and universal four-pole feed-through terminal for the insertion of a protection module without signal disconnection if the protection module is removed. The snap-in mechanism at the supporting foot of the base part allows the protection module to be safely earthed via the DIN rail. Since no components of the protective circuit are situated in the base part, maintenance is only required for the protection modules.


Specifications

Type
Part No.
Operating temperature range (TU)
Degree of protection
For mounting on
Connection (input / output)
Signal disconnection
Cross-sectional area, solid
Cross-sectional area, flexible
Tightening torque (terminals)
Earthing via
Enclosure material
Colour
ATEX approvals
IECEx approvals
Approvals
Weight
GTIN
PU
Part No.
*) only in connection with an approved protection module

BSP BAS 4

Basic circuit diagram with and without plugged-in moduleDimension drawing BSP BAS 4

The BLITZDUCTOR SP base part is an extremely space-saving and universal four-pole terminal for the insertion of a protection module with signal disconnection if the protection module is removed. The snap-in mechanism at the supporting foot of the base part allows the protection module to be safely earthed via the DIN rail. Since no components of the protective circuit are situated in the base part, maintenance operation is only required for the protection modules.


Specifications

Type
Part No.
Operating temperature range (TU)
Degree of protection
For mounting on
Connection (input / output)
Signal disconnection
Cross-sectional area, solid
Cross-sectional area, flexible
Tightening torque (terminals)
Earthing via
Enclosure material
Colour
Approvals
Weight
GTIN
PU
Part No.
*) only in connection with an approved protection module

Accessories

Earthing Module

For directly earthing cores connected to the BLITZDUCTOR XT / XTU / SP base part.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Colour
Weight
GTIN
PU

Test / Disconnection Module

Module for testing lines, plugs into BLITZDUCTOR XT / XTU / SP base parts.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Colour
Weight
GTIN
PU

Labelling System BA1-BA15

2x 165 adhesive labels for labelling DRC MCM XT monitoring devices with the bus address.

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Colour
Weight
GTIN
PU
  • BS BA1 BA15 BXT
  • 920 398
  • transparent
  • 5,6 g/Sa
  • 4013364126572
  • 1 Sa
  • Specifications (PDF)
  • More
    • Further Pictures
      Further Information
      Product Specifications (Text)

      Back

      Labelling system BA1-BA15
      Transparent adhesive labels
      printed with BA1 (1.1-1.10) to BA15 (15.1-15.10)
      for easy labelling of DRC MCM XT monitoring devices
      and BLITZDUCTOR XT base parts or modules;
      transparent, permanently adhesive, abrasion-proof

      delivery and installation.

      Brand: DEHN
      Type: BS BA1 BA15 BXT
      Part No.: 920 398

      or equivalent.

EMC Spring Terminals

Two spring terminals for permanent low-impedance shield contact with the protected and unprotected side of a BLITZDUCTOR XT / XTU / SP arrester. With integrated coding for direct or indirect shield earthing. Cable ties and insulating strips are included. Suitable for BXT(U) ML2 ...S ... / BSP M2 ... types (only direct shield earthing).

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Accessories
Clamping range (mm)
Weight
GTIN
PU
  • SAK BXT LR
  • 920 395
  • cable tie, insulating strips
  • 3-10
  • 12 g/Sa
  • 4013364118157
  • 1 Sa
  • Specifications (PDF)
  • More
    • Further Pictures
      open PDF
      Further Information
      Product Specifications (Text)

      Back

      EMC spring terminals of type SAK BXT LR
      2 spring terminals for permanent low-impedant 
      shield contact to the protected and unprotected side 
      of a BLITZDUCTOR XT.
      With integrated terminal coding for direct or indirect 
      shield earthing, with cable ties and insulating cap.

      delivery and installation.

      Brand: DEHN
      Type: SAK BXT LR
      Part No.: 920 395

      or equivalent.
      Installation Instructions
      Certificates
      CE_SAK_BXT_LR

DEHNpanel

Visual remote indicator for (multiple) surge protective devices (SPDs)

Show SpecificationsHide Specifications

Specifications

Type
Part No.
Operating state/fault indication
Enclosure material
Weight
GTIN
PU
  • DPAN L
  • 910 200
  • green LED (flashing) / red LED (flashing)
  • noryl
  • 140 g
  • 4013364144019
  • 1 pc(s)
  • Specifications (PDF)
  • More
    • Further Pictures
      open PDF
      Further Information
      Product Specifications (Text)

      Back

      DPAN L visual remote indication for surge protective devices
      Visual remote indicator with current-saving LEDs for surge protective devices (SPDs) 
      With remote signalling contact
      Also suited for alarm signalling of other devices with floating changeover contact
      For installation in switchgear cabinet doors.
      Power supply: 2x 1.5 V AA batteries
      Degree of protection: IP 40
      Mounting dimensions: 92 x 45 mm
      Dimensions: 96 x 48 x 75 mm

      delivery and installation.

      Brand: DEHN
      Type: DPAN L
      Part No.: 910 200

      or equivalent.
      Installation Instructions
      Certificates
      CE_DEHNpanel